PRESSURE ONLINE H LOGO.png

บทความ เกจวัดแรงดัน

Pressure and temperature measurement at extremely low ambient temperatures

Standard pressure gauges and thermometers generally deal with ambient temperatures right down to -40 �C. But what should be the features of a mechanical measuring instrument that works perfectly well in polar climates with even lower temperatures? This is often explained using the WIKA POLARgauge� as an example. This product family has been designed designed for measurement at extremely low ambient temperatures right down to -70 �C. The instruments are mainly utilized in crude oil and gas processing; for instance, in the local pressure and temperature tabs on pumping stations and pipelines.
Minus 40 �C ? this value is often exceeded faster than one thinks. This is demonstrated with a look to Russia. There, tables with standard temperature values even indicate a lot more than -60 �C for some regions. For mechanical instruments which is operated such ambient conditions, two critical points must be observed:
For pressure measurement at extremely low ambient temperatures only available with filled case: The WIKA pressure gauge model PG23LT.
1. The case filling
A measurement at extremely low ambient temperatures requires filled-filled measuring instruments. The liquids used for this protect the instrument from condensation formation within the case caused by temperature fluctuations. They thus avoid the window from frosting, so the measured value can still be read safely.
However, the majority of silicone oils useful for this purpose begin to solidify at temperatures below -40 �C. The movement then no more works, or may also freeze. Application-aligned monitoring of the parameters (e.g. process pressure) can no longer be ensured.
Therefore, for the POLARgauge� series a particular low-temperature silicone oil has been specified. This oil remains in a state that allows correct measurement and measured value display, even at -70 �C.
The case of the POLARgauge� model PG23LT (r.) compared to a typical version (l.): It does not have any elastomers.
2. The elastomers
Elastomers are found in all mechanical pressure gauges or thermometers. They offer a secure sealing between the individual components. At length, these are the flat gasket at the window, sufficient reason for pressure gauges and also the blow-out device on the trunk of the case and the vent valve for pressure compensation.
However, the sealing materials used in standard designs cannot durably withstand suprisingly low ambient temperatures. They become brittle over time and lose their sealing properties. This results in the event filling escaping. This, subsequently, leads to the formation of condensation and the frosting of the window.
Therefore, in ไดอะแฟรม ซีล of the POLARgauge� series, elastomers have already been eliminated in all critical points. The seal between your window and case is made from a special material. It really is adapted to extremely low ambient temperatures. The vent valve includes a stainless steel cap.
Overview of the WIKA POLARgauge� series
Note
You can get further information on the POLARgauge� series on the WIKA website via the following links. The product family currently comprises four instrument types: The Bourdon tube pressure gauge model PG23LT, the differential pressure gauge models 733.51, 733.31 (filled versions of the models 732.51, 732.31), the bimetal thermometer model 55 and the gas-actuated thermometer model 73. Thus, the right variant is available for every application. Do diaphragm seal want to buy differential pressure gauge models? In our WIKA online-shop you will find some of our standard designs. When you have any more questions, your contact will gladly assist you to.

Recent posts