บทความ เกจวัดแรงดัน


Reverse Osmosis (RO) is a separation technique that is appropriate for a variety of functions, especially when salt and/or dissolved solids must be faraway from an answer. ไดอะแฟรม ซีล is likely one of the commonest kinds of water treatment.
According to Anelia Hough, water therapy marketing consultant at Allmech, main South African producer of boilers and provider of water therapy parts, there are a quantity of factors to be thought of when choosing an RO system: the customer’s capacity requirement (i.e. water usage), the daily manufacturing capability of the system, and the % rejection for particular contaminants in the source water.
“Beyond this, RO plants require proper upkeep and care to make sure they operate optimally and to increase their lifespan,” she says. “Aside from regular upkeep, one of the best ways to protect a RO plant is by pre-treating water, which reduces the pressure on the RO membrane – a expensive part. It also helps to avoid points like scaling and bio-fouling.”

Common Issues with RO Plants

“Factors that may affect a RO system’s efficiency embrace temperature, operating pressure, again stress, the equilibrium effect/TDS creep, p.c restoration, and, in fact, the RO membrane’s permeate production and % rejection ratings,” says Hough.
The most common points in RO plants embody:
• Fouling: occurs when contaminants accumulate on the membrane floor, successfully plugging the membrane. There are many contaminants in municipal feed water that are innocent for human consumption, but giant sufficient to shortly foul (or plug) an RO system.
• Scaling: when particles are deposited on a membrane, inflicting it to plug. As certain dissolved compounds turn out to be more concentrated, scaling can occur if these compounds exceed their solubility limits and precipitate on the membrane floor as scale. Scaling calculations are usually only primarily based on the silicate focus within the feed water.
• Biofouling: reduces actual membrane efficiency via microbial generation in a biofilm that types on the membrane surface.
• Chemical injury: on a RO membrane, this implies a higher permeate move and poorer quality permeate water. Dosing of oxidant brokers, such as chlorine or hypochlorite, can reduce efficiency and finally end result in the failure of the RO membranes. Use of aggressive cleaners can even cause chemical damage.
• Mechanical harm: can occur when a system is pressurised too quickly, damaging the RO membrane elements. One of the most clears signs of damages on a RO membrane is the shortage of salt rejection capabilities. There is also very often an increase of permeate flow rate.
Pre-treatment may help to keep away from these issues, and Hough says there are various choices obtainable.
Pre-treatment Options

“When selecting a pre-filter, users ought to at all times search for a verified efficiency ranking next to the micron measurement on the filter’s technical information sheet,” says Hough.
• Multi Media Filtration: A multi-media filter is used to assist stop fouling of a RO system. This type of sediment filtration is ideal for a pre-treatment process to any reverse osmosis system serving to to ensure long lifetime of the RO membrane components. A well operated multimedia filter can take away particulates down to 20 microns. A multimedia filter that uses a coagulant addition can take away particulates all the way down to 10 microns.
• Micro Filtration: The filters used in microfiltration have a pore dimension of roughly 0.1 micron. Bacteria and suspended solids are the only component that may be removed through microfiltration.
• Antiscalants and scale inhibitors: There are many chemicals that can be used as antiscalants and dispersants to enhance the operation of RO. Antiscalants are a household of chemical compounds designed to inhibit the formation and precipitation of crystallized mineral salts that form scale.
diaphragm seal by ion exchange: A water softener is a filtration system that removes hardness-causing calcium and magnesium minerals from water through a course of referred to as ion exchange. Standard water softeners are cation trade units. Cation trade entails the alternative of the hardness ions with non-hardness ions.
• Granular Activated Carbon (GAC) Filtration: Activated carbon removes residual chlorine and chloramines by a chemical response that entails a switch of electrons from the surface of the GAC to the residual chlorine or chloramines. The chlorine or chloramines find yourself as a chloride ion that’s no longer an oxidizer.
“It’s also important to wash the RO membrane frequently,” says Hough. “This entails low and high pH cleaners to take away contaminants from the membrane. We tackle scaling with low pH cleaners and organics, while colloidal and biofouling are handled with a excessive pH cleaner.”

Allmech provides the whole range of pre-treatment and RO membrane maintenance solutions for RO crops, including filtration techniques, softeners, antiscalants, chemical compounds and different consumables.
“At Allmech, we’re trying ahead to rising this part of our business in 2022 and past, leveraging our experience in all things related to water therapy. We even have a boiler division and we inventory a complete vary of Runxin valves, so we’re properly positioned to be a one-stop shop for anyone needing a water treatment or boiler specialist, and we’re anticipating a busy year ahead,” Hough says.

Recent posts